Professionals who understand the networking technology in general and Juniper Networks enterprise routing and switching platforms are very welcome in today's IT area. Real JN0-648 practice exam has been released online to help you complete the professional level of Juniper Networks Certification Program (JNCP) Enterprise Routing and Switching track to demonstrate competence with Juniper Networks technology. Killtest provides real JN0-648 practice exam with valid exam questions and answers for Juniper JNCIP-ENT certification. We ensure that you can pass JN0-648 Enterprise Routing and Switching, Professional (JNCIP-ENT) exam in the first try.

Complete Four Levels To Achive Juniper Enterprise Routing and Switching Certification Track

To earn Enterprise Routing and Switching Certification Track, you need to complete four levels successfully as shown:

Junos, Associate (JNCIA-Junos)

The associate level for Enterprise Routing and Switching Certification Track is Junos, Associate (JNCIA-Junos), which is designed for networking professionals with beginner-intermediate knowledge of networking. No prerequisite needs, but you need to pass JN0-103 exam to complete the Junos, Associate (JNCIA-Junos) certification. 

Enterprise Routing and Switching, Specialist (JNCIS-ENT)

Enterprise Routing and Switching, Specialist (JNCIS-ENT) is the specialist level, which requires you to complete Junos, Associate (JNCIA-Junos) level first. It is designed for experienced networking professionals with beginner to intermediate knowledge of routing and switching implementations in Junos, you need to pass JN0-348 exam to verify the candidate’s basic understanding of routing and switching technologies and related platform configuration and troubleshooting skills.

Enterprise Routing and Switching, Professional (JNCIP-ENT)

Enterprise Routing and Switching, Professional (JNCIP-ENT) is the professional level for experienced networking professionals with advanced knowledge of the Juniper Networks Junos OS. The prerequisite of Juniper JNCIP-ENT certification is Enterprise Routing and Switching, Specialist (JNCIS-ENT), which requires you to pass JN0-648 exam successfully.

Enterprise Routing and Switching, Expert (JNCIE-ENT)

The expert level is Enterprise Routing and Switching, Expert (JNCIE-ENT). At the pinnacle of the Enterprise Routing and Switching certification track is the JNCIE-ENT practical exam, JPR-944 exam. This exam is designed to validate the networking professionals’ ability to deploy, configure, manage and troubleshoot Junos-based enterprise routing and switching platforms. 

JN0-648 Juniper JNCIP-ENT Exam Needs To Be Registered At Pearson VUE

As one candidate, who is planning for JN0-648 Enterprise Routing and Switching, Professional (JNCIP-ENT) certification exam, you need to register this exam at Pearson VUE. Real Juniper JNCIP-ENT JN0-648 exam contains 65 exam questions, which need to complete in 120 minutes. 

Real JN0-648 Practice Exam Online at Killtest are based on Juniper JNCIP-ENT JN0-648 exam objectives. Killtest assures you to get the much-needed information and real Juniper certification JN0-648 exam questions that will enable you to pass JN0-648 Enterprise Routing and Switching, Professional (JNCIP-ENT) exam or otherwise we guarantee to pay you back if you don’t get the desired result in the JNCIP-ENT JN0-648 exam after spending the proper amount of time on preparations. 

Read JN0-648 Free Exam Demo Questions Before Getting Real JN0-648 Practice Exam

Which BGP message type contains NLRI information?

A. notification

B. keepalive

C. update

D. open

Answer: C

You are implementing a single spanning tree instance in your network and want to use the protocol that will give you the best convergence time in the event of a physical network failure of the root bridge.

Which spanning tree protocol will satisfy this requirement?

A. RSTP

B. STP

C. MSTP

D. VSTP

Answer: A

What are three well-known mandatory BGP attributes? (Choose three.)

A. MED

B. AS-path

C. origin

D. next-hop

E. community

Answer: BCD

You have PIM SM multicast configured and running in a network environment comprised of EX4300 devices. Your customers report increased delay when switching channels using IPTV. To help decrease the delay, you implement PIM join load balancing. You add the set protocols pim join-load-?balance command to the configuration. After committing, you notice that the flows are still using only one path.

In this scenario, which statement is correct?

A. The clear pim join-distribution command must be issued.

B. The interfaces must be specified to use for load balancing.

C. IGMP snooping must also be configured.

D. PIM join load-balancing only works for PIM-DM.

Answer: A

You have configured CoS on a Junos device. A packet is classified as best effort by a behavior aggregate (BA) classifier, and as expedited forwarding by a multifield (MF) classifier.

Which statement is true in this scenario?

A. The packet will be placed in a queue associated with the BA classifier.

B. The packet will be placed into the queue which is least congested.

C. The packet will be placed into the queue that has the most bandwidth assigned to it.

D. The packet will be placed in a queue associated with the MF classifier.

Answer: A

You must ensure that all management traffic sourced from your Junos devices is set with a specific DSCP code-point value.

Which action will accomplish this task?

A. Apply the DSCP code-point to the [edit class-of-service host-outbound-traffic]hierarchy.

B. Apply the DSCP code-point to the [edit class-of-service interface lo0.0]hierarchy

C. Apply the DSCP code-point in an egress policer.

D. Apply the DSCP code-point to a rewrite rule.

Answer: A

You are currently using VLAN IDs 2 through 300 within your Layer 2 domain and you need to configure VSTP to prevent loops. You must ensure that all VLANs are loop free.

In this scenario, which statement is correct?

A. You must ensure that the VLANs are balanced between two different root bridges.

B. You must enable RSTP to account for all VLANs.

C. You must ensure that the bridge priority is set to the lowest value on all switches in the Layer 2 domain.

D. You must enable all VLANs, 2 through 300, under the VSTP configuration.

Answer: D

What are two supported PoE management modes? (Choose two.)

A. class

B. standalone

C. static

D. mixed

Answer: AC

Which two statements are correct about a functional ESI LAG interface? (Choose two.)

A. The LACP system ID must be the same.

B. The ESI values must be the same.

C. The LACP system ID must be different.

D. The ESI values must be different.

Answer: AB

You notice a mass withdrawal of routes for some of the network hosts. You determine that the link on the ESI interface is down.

Which route type is used in this scenario?

A. Type 2

B. Type 3

C. Type 1

D. Type 5

Answer: C